OPA-5-GPS-V4A ADS-B Antenna 1090MHz GNSS 5,5dBi Sea Water Resistant
Mat. No:
354,62 €
Only 2 left in stock
Product description
High performance OPA-5-GPS ADS-B antenna for reception of Mode-S/ADS-B signals with an integrated GNSS module. Made from stainless steel V4A (1.4571 316Ti). High gain (true +5,5 dBi) including mounting material Optimized for harsh conditions offshore and cost regions. Electrically equal to our A3 antennas is this product suitable for installations with short and moderate cable length, or when using low loss RF cable up to an attenuation of 3dB.
Comes with an extra robust mast clamp also made from V4A (1.4571 316Ti)
OPA-5-GPS antenna is certified for MIL-STD-810G, method 509.5 (48h/48h). The N-female connector of this antenna is exposed and can be protected with sealant and is therefore specially optimized for use in salty air. Condensation is excluded by a hermetically sealed design.
Technical data
| OPA-5-GPS-V4A ADS-B Antenna 5,5 dBi 1090 MHz GNSS | |
| Operating frequency band (MHz) | 1065-1134 + 1575/1602 |
| Impedance (Ohm) | 50 |
| VSWR, maximum | 1,5 |
| Polarization | Vertical |
| Gain (dBi) | 1090Mhz: 5,5 / GNSS: 3 + 16dB amplifier |
| Sector E level (-3 dB) | 25 |
| Sector in H-plane (-3 dB) | 360° (omni directional antenna) |
| Max. transmit power | not recommended for transmission |
| GNSS Voltage (V) | 2,7 – 5 |
| GNSS supply current (mA) | 8 |
| Connection | N socket |
| Length (cm) | 55 |
| Weight (kg) | 0,4 |
| material | GRP, copper, stainless steel V4A |
| Certified according to | MIL-STD-810G, method 509.5 (48/48h) |
| Mast clamp stainless steel V4A | |
| Mast diameter max. (mm) | 65 |
| Antenna socket diameter (mm) | 37 |
| Material | V4A (1.4571, 316Ti) |
